Printer Error 0x00003e3 in Windows 10
Are you still having a Printer Error 0x000003e3 in Windows 10 ? This issue does not allow users to connect to a printer on a network and is very popular after installing some cumulative updates. Yeah, the culprit sounds straightforward, but it’s the bug that makes a mess and ends up with multiple problems.
Some Windows 10 users experience an error while trying to print or connect a shared printer to the network while trying to print their results. In this case, the printer status is shown offline and an error message appears like “can not link to the printer” or the error 0x000003e3 failed. We will address the possible reasons and possible workarounds for solving the problem today in this guide.
Fix Can’t Connect Printer Error 0x000003e3 in Windows 10
The key trigger for such a Can’t Link Printer Error 0x000003e3 in Windows 10 is the misplaced Mscms.dll file, the corrupted Printer spooler and the incompatible printer driver. The relation issue often arises if the printer is also responsible for the problem occurring. So, if you are confident that your cable link is working properly, apply a troubleshooting guide, such as restarting the Spooler services, upgrading the driver, copying the Mscms.dll file to the system32 directory to save the printed network.
Have you found a 0x000003e3 printer error on your computer and been searching for a reliable solution? Yeah! Yeah! Oh! To support you, we are here. This printer usually happens when users attempt to print documents or share a printer’s Local Network with Windows. If the printer error is 0x000003e3, this means that Windows is unable to connect to the printer. We will share the basic troubleshooting guidelines in this post that can help you to troubleshoot the 0x000003e3 printer error code on your device.
How to Fix Windows Can’t Connect to Printer Error 0x000003e3 Windows 10
To Fix the Printer Error 0x000003e3 in Windows 10, use the following workarounds.
1} Re-connect the Printer
Be sure to restart your printer before continuing to the alternatives, as doing this also fixes many errors. All you need is to turn the printer off and disconnect the cable from its port. Then plug your printer back in and wait for at least 30 seconds. Finally, turn the printer on and verify that the problem either exists or has vanished.
2} Restart the Print Spooler Service
Windows Unable to Link to Printer Error 0x000003e3 often occurs when the Print Spooler service is shut off. This is why, if found disabled, we suggest testing its current status and restarting the services. Here’s how to do it—
- To invoke the Run dialogue, press the Windows + R button.
- In the text bar, type services.msc, and click OK to open the same one.
- Scroll down and find the Print Spooler service on the right-hand window.
- When it is located, right-click it and, using the context menu, pick Properties.
- Change Startup type: to Automatic in the upcoming window.
- Here, check if the status of the service reads Going.
- To save the changes, hit the Start button then OK.
That is, the 0x00003e3 error can be fixed by restarting the spooler operation. Follow the next workaround if not,
2} Copy mscms.dll manually
Mscms.dll is a reboot driver installation colour module directory that can address the 0x000003e3 printer error in Windows Can not Attach. You should manually copy this folder and paste it into the destination folder to fix the problem. Here’s how you can proceed.
- To open the Run dialogue, click Window and E on the shortcut.
- Navigate to the next route,
- Scroll down the mscms.dll directory and find it.
- When it is found, right-click and select the copy button.
- Reach out to the address below and paste the copied item here, i.e. the mscms.dll file.
- This only applies to PCs with a 32-bit architecture.
- Navigate to the following route if you are using a 64-bit device and paste the mscms.dll file into it.
- Finally, to check the new adjustments, restart your PC.
3} Create a New Local Port
The Local Port gets affected in some situations and therefore produces a Windows Can’t Link to the Printer Error 0x00003e3. Build a new Local Port using the following steps to get rid of this problem.
- Select the Win button, and in the search bar, select the control panel.
- Expand the category of Computers and Printers here.
- Hit Add a printer on the top ribbon, and let the machine search for shared printers available.
- If you don’t see the printer you are using, click on the link ‘I don’t want the printer to be identified’.
- Check the “Attach a local printer or network printer with manual settings” radio button and tap Next.
- Mark the circle next to Build a New Port on the subsequent wizard.
- Now type the IP address of your device in the Printers Port Name field. Make sure to use “\\192.168.1.50\HP LaserJet Pro M1136” format as follows.Here, 192.168.1.50 is the system’s IP address where the shared printer is installed.
- You should also enter the IP address of the network if you want to use the printer below the network area.
- Tap OK afterwards, then tap Next to go ahead.
- To instal the driver, pick the printer model and then pick Next again.
- To save the recipe, click OK and then Finish changes.
How to know the IP address of your PC
If you do not know the IP address of the machine, just go through the steps below.
- Right-click Start and use the Power Menu to select Settings.
- On the successor panel, pick the Network & Internet group, followed by Wi-Fi.
- Switch to the right pane, and double-click (used for network connectivity) on the computer.
- Scroll to the Properties section and annotate the IPv4 address.
4} Uninstall Incompatible Printer Drivers
This error could also be caused by the existence of incompatible printer drivers. Therefore, just uninstall the obsolete or corrupt drivers and then re-install them. Here’s how to move on—
- Right-click on the Start button and pick Run.
- In the gap, type printmanagement.msc and press OK to start the Print Management Wizard.
- First, as seen below, extend the All Drivers directory
- Right-click on the Microsoft Print to PDF button and press Delete.
- Delete all of them if there is more than one printing programme.
- Reboot the PC and, along with its associated drivers, connect the printer again.
5} Using Registry Editor
The Can’t Attach Printer Error 0x000003e3 can also be fixed by changing certain entries in the registry. Just make sure that before continuing to the following steps, you have created a backup of essential files and directories.
Related Blog : Toshiba Printer Offline
Note: At first, stop the Printer Spooler visiting the Services tool (discussed in Method 2).
- Click Win, and in the text area, start typing Regedit.
- Right-click the Registry Editor button and choose Run as Administrator.
- Tap Yes to approve access if the UAC prompt is shown.
- Now, at its address bar, copy / paste the following path and press enter.
- Furthermore, you can navigate to the destination folder by sequentially extending the entries available in the left pane.
- Next, extend the directory of CopyFiles and remove the current folder of ICM.
- Close the registry window once again to confirm your latest changes.
- Restart your PC and verify whether or not the printer problem is solved now.
Note: If you are not able to reach out to the above address, try the following path –
- Right-click on the Client Side Rendering Print Provider, and then choose the delete option from the context menu.
- Be sure to use Method 2 to start the Printer Spooler service again.
Lastly, reboot your PC.
That’s it, we hope this guide helps address the 0x00003e3 error-Can’t Link to the Printer has now been fixed.
Popular Post : Epson Printer offline in windows 10