How to fix Brother Printer Error Code 73?

With the most outstanding performance of Brother Printer machine can sometime come across errors. To Fix Brother Printer Error Code 73 the Print unable message is due to failure in the beam detecting sensor in the laser scanner.  If you receive the error code 73 on your control panel the best thing you can do is restart the machine by turning the machine off then turn it back on again. Typically, the error falls in one of two categories. Either a brief accident that simply goes away or one that is there to say. You have even seen this happening when cleaning the machine. If the machine gets bumped or moved while printing the error code can happen. Below is some additional repair and troubleshooting advice for this error along with buying options for the laser scanner assembly if it continues to be an issue. Or you can connect to Brother Printer Technical Support Number for assistance and one to one conversation for problem solving.


Steps to troubleshoot for the Print Unable 73 Message of Brother Printer

Step1: Strengthen maintained on the Laser Unit Optics. If a machine is started when it is cold, condensation will get on the mirrors and lenses in the optics on the laser scanner assembly. Whenever you are taking a laser printer out of the cold into room temperatures always let the machine sit for several hours before attempting to turn on and use. 4hour use is recommended

Step2: Reseat the Laser Scanner Assembly harness connectors.

Step3: In case of Laser Unit Failure – Replace the Laser Scanner Assembly.

Step4: Engine PCB Failure – Replace the Engine PCB Board.

The above steps are sufficient to resolve the Brother Printer Error 73 step by step. Follow carefully the steps to get rid of the problem.


Connect for prompt online assistance to Brother Printer Support + 1-877-977-6597 (toll-free)

In case your problem still exist after following the steps of blog as well you can call on Brother Printer Support Number | + 1-877-977-6597 (toll-free) and have access to efficient and effective services to resolve your Error Code 73.  Brother Printer Support tech expert team is available 24*7 to assist you with every possible solution to get your queries resolved in short duration of time. The right, experienced technician are in your services at doorstep for problem solving.

About Robert John

I am Robert John working as Printer Support Expert from the past 10 years. You can Contact with me for any difficulty you face with your Printer device. We assured you for the best services and support. Check us now.