Guide to Troubleshoot Error code 0xc00000f Windows 10
After a Windows 10 update, won’t Windows start? Having the BCD Error code 0xc00000f / 0xc0000225 at startup with a blue screen? This error 0xc000000f states that something is wrong with BCDD (Boot configuration data). And it was not possible to load the application or operating system because the appropriate file was missing or contained errors.
As we all know, Microsoft is rolling out version 2004 of Windows 10 for everyone, and compatible computers are automatically updated. But some users complain that Windows 10 will not start with BCD Error Code 0xc000000f / 0xc0000225 after the upgrade phase is full. The error 0xc000000f states that something is wrong with BCDD (Boot configuration data).
Steps to Fix Windows 10 error code 0xc000000f
The most common explanation for the Windows 10 Error Code 0xc000000f is that the BCD file can’t be identified by BOOTMGR. Because of power outages, disk-write errors or incompatible machines, it may be damaged or missing. Whatever the cause, we have different solutions here to help repair error code 0xc000000f in Windows 10.
Delete and restart the machine from all external devices such as external HDD, USB Drive, Printer, Scanner. Even If you find that the issue has started After your machine has recently installed new hardware: uninstall it, restart the computer, and check if the error screen appears again.
Perform Startup Repair
Perform Startup Repair from advanced boot options that prevent windows from starting normally, by automatically diagnosing and fixing issues.
- To do this, you need to boot from the Windows media installation system. If you don’t have a new Installation Media / Bootable USB, build one.
- Skip the first tab and then press the Repair Device button on the installation screen.
- This will reset the windows to
- Click Troubleshoot next, and then click Advanced Options.
- To start the process of diagnosis, click on Startup Repair.
If any programs trigger windows to start normally, this will scan Repair. After that, restart the windows and confirm Normally Started.
Set correct partition as active
Often this error screen occurs because an incorrect partition is set to active, so you can set the correct partition using the Diskpart utility.
- To use Advanced Options again, click on the command prompt.
- Form Disk Component now, then press the Enter key.
- Hit the Enter key next to the List Disk type.
Note down your volume for Windows installation here (Check below picture for a better understand)
Type then Choose Partition D (Note : D is windows installed volume, For you, it may be different)
And the installation partition for Windows must be Active, which you can do by typing the active button. Restart the windows and pick Normally Started.
Rebuild BCD in Windows 10
The “File:” row mentions “\boot\bcd” as a possible corrupt or corrupted file that causes the “Your PC needs to be repaired” screen to appear, along with the exact error code in the “Error Code:” row, if any errors occur. You should restore the BCD in these situations, as your computer’s BCD file can be corrupted or destroyed.
Now Execute Bellow commands to restore a corrupted BCD.
- Bootrec.exe \fixmbr
- Bootrec.exe \fixboot
- Bootrec \rebuildBcd
- Bootrec /Scanos
This will undoubtedly fix the configuration details, and so the BCD Error Code 0xc000000f in Windows 10 will. Also, check the following below for Disk Errors.
Related Blogs : Epson Printer Offline
Check Disk Drive Errors
After BCD is restored, type chkdsk /f /r on the same command prompt to check and repair disk drive errors, bad sectors, which can cause the boot error. When you type this, the scanning process for disk errors will start. Wait until the scanning process is 100 percent done. You will get a screen as shown below after completing the scanning process. Type Exit to close the Command prompt, then Check this ti to restart windows.
Create a new EFI Partition
The EFI partition might be missing in some situations, but don’t worry because you can easily create a new one. But before that, make sure that you have a “Windows installation media” (bootable USB/DVD) and free disk space of 200 MB.
Skip the first screen on the next screen Press Shift + F10 to open the Command prompt to boot from the installation media. Notice the letter downstairs (ltr). You will also need to remember the volume ltr that comprises your Windows partition (just look for Boot written in the Info column). Now type: bcdboot C:\Windows /l en-gb /s B:/f ALL; assuming that, in addition to B for th, C is a letter for a Windows partition,
Restart your PC and check if the windows have started normally.
Contact for online help to fix windows Error code 0xc00000f online …