How to do Brother HL-3170CDW Wireless Setup.

Brother HL-3170CDW Wireless Setup

The Brother HL 3170CDW printer is a decent alternative for common and office purposes as it provides quick and effective printing. They can print all sides of the paper at once and can print up to 23 pages per minute. You can also use this printer via USB, Ethernet, and Wi-Fi. Here we have included instructions for the Brother HL-3170CDW Wireless Setup.

Here we are going to have some basic setup steps that will make it simpler for you to execute the setup process.

brother hl-3170cdw wireless setup

How To do Brother HL-3170CDW Wireless Setup?

1. Before you set up your Brother machine.

You can find the remote device settings for your remote switch or gateway. Check and record the latest remote device settings underneath (you will require this data later):

  • System Name (otherwise called “SSID” or “ESSID”)
  • System Key (otherwise called “Secret word”, “Security Key”, or “Encryption Key”)

How to find the Network Name (SSID) and Network Key (Password)

  1. Check the base or side of your remote switch or passageway.
  2. See the documentation gave your remote switch or passageway.

After testing the device data of your remote switch or gateway, go to Step two to set up your device on a remote system.

Check if brother hl-3170cdw wifi setup is OK then switch to the next move.

2. Set up a Brother machine on a wireless network.

At the point where you’ve located the remote control settings for your remote switch or portal, set up your Brother computer as seen in the video below or as shown in the region below the video.

  • Set up Brother HL-3170CDW Wireless Setup on your Brother computer on a remote system:
  • Interface the power chord line to your Brother computer and then link it to the electrical attachment.
  • Switch the console on your brother.
  • To pick a network option, access the Up/Down keys and click OK.
  • Browse the Up/Down key to pick the WLAN option and click OK.
  • (This progression does not have any major effect on all machines.)
  • Browse the Up/Down key to pick the Wizard tab and press OK.
  • In case of a WLAN Allow investigation? The prompts, choose the alternative Yes.
  • Make sure this is going to initiate the magician.
  • The system will wait for your call to show all validated network names (SSIDs).
  • At the point where the SSIDs rundown appears, click the Up or Down buttons to pick the SSID you reported before, and then press OK.
  • Choose one of the following to make sure that Brother HL-3170CDW Wireless Setup is OK and proceed to the next stage.

Check if Brother HL-3170CDW Wireless Setup is okay then move to the next step.

3. Download & Install – Brother Machine’s Software.

You should add the driver in the wake of setting up your Brother machine. Download the driver:

Windows User

  • Go to the Downloads segment of this site and download the Full Driver and Software Package. Adhere to the establishment directions on the download page.

Macintosh User

  • Go to the Downloads segment of this site and download the Full Driver and Software Package.
  • The establishment directions are accessible on the download page.

If you ever experience a Brother HL-3170CDW Wifi Setup installation problem or some other technology-based question, then we invite you to reconnect with us at our helpdesks without delay around the clock or you can even connect remotely. We guarantee that you have in-time answers to all of your technological problems.

Brother HL-3170CDW Wifi Setup Applying a USB Cable?

  • Uncover the box cover of your Brother HL-3170CDW printer and check that all printer peripherals have been successfully installed by Brother HL-3170CDW Wireless Setup.
  • The parts of the unit will be the already induced portion of the Drum collection, ensure proper standards for AC input, CD-ROM link as per the Guide.
  • The original reading of the welfare assistance object and then the snappy set up directly with the technique of the correct institution
  • Remove the printing materials and open the printer front door.
  • Remove the drum collection to clear the gel of silica.
  • Carefully cut the orange tape to prevent any issues with Brother HL-3170CDW Connect to Wifi.
  • You will get an orange tape under the printer surface, make sure it has to be removed by now. Now continue to close down the front panel
  • Open the paper plate under the drum unit
  • Put the white sheets on the paper plate and change the width of the guides. Try not to change the width controls to immovably, as this may damage the paper and may cause paper jam problems.
  • At present, attach the force of your printer to the electrical outlet.
  • Make sure that you interface the force-extension to your printer and the power socket, and turn the printer on.
  • At that point, link the USB connection to the PC as soon as the printer is ready for the first run through the connection.
  • Also, the PC must be connected to a functioning machine organization.
  • When your PC is linked to the Brother HL 3170CDW Network Setup driver to the printer, the underlying drivers for your printer will naturally be downloaded.
  • When interfaced with the USB connection, ensure that the PC and printer are at some rate of separation.
  • Now turn off the printer and turn it on again. The printer is currently ready to print.

Related Blog: Brother MFC-J480DW Wireless Setup

Your Brother HL 3170CDW printer should be able to connect to your home or office Wi-Fi after following the above steps. So make sure you’ve taken all the instructions carefully. If you cannot use your printer wirelessly, you need to contact a specialist who will be able to direct you through the process in real-time. 

About Robert John

I am Robert John working as Printer Support Expert from the past 10 years. You can Contact with me for any difficulty you face with your Printer device. We assured you for the best services and support. Check us now.